Learn the 3 Common Types of Commercial Air Conditioning and Their Advantages

Multi-Split Systems

Multi-split systems function nearly identically to single-split systems.

The only distinction is that the interior units do not require an outdoor unit. Instead, numerous indoor units can be connected to a single, larger outdoor unit.

In this type, inverter technology is used, allowing the compressor to work at various speeds.

It also has sensors that detect slight changes in temperature and make little modifications as needed, reducing energy consumption.

Multi-split air conditioning systems are ideal for big office spaces, retail stores, and other structures with numerous levels and many walls.

However, it is worth noting that complex systems typically necessitate more pipes than single units. It will raise the cost of installation but also the time it takes to complete.

Advantages of Multi-Split Systems

  • Heat pumps in the system take advantage of heat’s natural tendency to flow from warm to cool places, saving money and energy.
  • Because fewer exterior units are required, you don’t need much outdoor space.
  • You may protect the exterior appeal of your building by using fewer outdoor units.
  • You are not limited to just one type of indoor unit with multi-split systems; you can have any combination of wall and ceiling-mounted AC units and air curtains if desired.

VRV/VRF Systems

Variable Refrigerant Volume (VRV) and Variable Refrigerant Flow (VRF) systems are air conditioning systems that are often the most efficient solution for medium to large-sized properties, such as mixed-use buildings or hotels.

VRF systems are air-cooled and refrigerant-based, with outside condenser units and indoor fan coil units similar to standard air conditioning systems.

A VRF system, on the other hand, combines multiple smaller air handlers that can be regulated individually and piped back to one system, rather than one giant unit pumping air to the entire space.

The phrase variable refrigerant flow refers to the ability of the system to control the quantity of refrigerant that flows to each of these tiny air handlers.

VRF systems have two types: Heat Pump and Heat Recovery.